Showing results 1-25 of 328
Display per page

20-642

Schneider Electric 20-642 Thermostat Mounting Ring, Steel, includes two #6 flat head screws

20-693

Schneider Electric 20-693 Tygothane Tube Assembly, 3/16"", with spring, one tube with four eyelets, but no fittings

20-706

Schneider Electric 20-706 Gauge tap adaptor for T15 an T16 only, one end accepts 1/8"" MPT gauge, other end screws into thermostat body

20-707

Schneider Electric 20-707 Cast metal thermostat guard, for 2x2"" or 3x3"" units

20-712

Schneider Electric 20-712 Dial Stop Kit

20-715

Schneider Electric 20-715 Molded Lexan guard for 2x2"" devices, clear front, satin chrome enamel base

20-778

Schneider Electric 20-778 Copper Well, 3/8"" x 7-1/32"" with 1/2"" NPT bushing

20-782

Schneider Electric 20-782 Copper Well, 3/8"" x 10-17/32"" with 1/2"" NPT bushing

20-803

Schneider Electric 20-803 Neck Extension Adaptor, converts 7-1/32"" well to 10-17/32"" well

20-805

Schneider Electric 20-805 Stainless Steel Well, 3/8"" x 7-1/32"", with 1/2"" NPT bushing, includes 20-803

20-850

Schneider Electric 20-850 Thermostat Mounting Plate, provides 2x2"" device mounting to a 2x4"" verticle or horizontal outlet box, includes 2 wing bolt screws, black

20-881

Schneider Electric 20-881 Thermostat Calibration Wrench, 1/16"" and 1/4"" hex head,

20-944

Schneider Electric 20-944 Restrictor, 1/0 scfh, for use on 1/4"" O.D. copper tubing or can be used on polythylene with insert

200-600 A

Double Throw Safety Switch

2002-6EA2-3001

SWITCH 4POSITION CAM

2002-6EA7-3001

SWITCH 4POSITION VOLT METER SELECTION

200ACBMCCIV8998

BCKT W/MTG OP

21-038

Schneider Electric 21-038 Restrictor Tee, 1.0 scfh, for use with one-pipe thermostats or transmitters, red

21-039

Schneider Electric 21-039 Restrictor Tee, 0.5 scfh, for special applications requiring low air flow

21-152

Schneider Electric 21-152 In-line Check Valve, wil operate on 1/4 psi differential

21-153

Schneider Electric 21-153 In-line Restrictor, 1.0 scfh for use with NCS- TUBE or 1/4"" poly tube

21-473

Schneider Electric 21-473 Snap-in ""labor saving"" fitting for mounting 2x2"" thermostats, humidistats and transmitters on drywalls having at least 3-1/2 in. studs

21-721

Schneider Electric 21-721 Main air header 3/8"" ftp input port and nine output ports for MCS-TUBE tubing

21-876

Schneider Electric 21-876 Thermostat Guard for 2x2"" devices, opaque gray

21-928

Schneider Electric 21-928 Gray cover with Barber-Colman logo dial
Spinner